FMHG-1 Continuous-mode, mobile foam generator FMHG-1
The continuous-mode foam generator is well suited for foam cleaning of machines, pieces of equipment and hard to reach places, as well as for the
aqueous wash and rinse of foam surfaces. The foam and fog should be uniformly applied to the surfaces, and into the air. Avoid repetition!
Operation:
The generator should be moved to the area to be cleaned, connected to the required
power supply, then the chemical absorption hose should be let into the plastic can (located on the trolley), finally the water-wash and
foaming of the surfaces can be done by opening the corresponding control valves.
Technical data:
material: stainless steel
accessories: workstation located on a trolley, work gun with a 8 m hose operating temperature: max. 40°C
Application area: In medium-sized production facilities, 100-150 m2 areas can be cleaned from one position.
Required to run: - max. 8 bar compressed
air (compressor or air network) - (network) water pressure min/max: 2,5/10 bar
Advantage: User-friendly; continuous foam production, no refill;
possibility of aqueous wash; can be relocated.
